Fiber Fusion Splicer

Fiber Fusion Splicer

1. STXH-S-27LDF Specialty Fiber Fusion Splicer FEATURES Applicable to cladding diameter 125~400m fibers Accurate alignment, world standard fusion loss 14s splicing time, 24s heating time for 40/60mm tube Applicable to different types fibers (SM/MM/DS/

1. STXH-S-27LDF Specialty Fiber Fusion Splicer

fiber fusion splicer

FEATURES

  • Applicable to cladding diameter 125~400μm fibers
  • Accurate alignment, world standard fusion loss
  • 14s splicing time, 24s heating time for 40/60mm tube
  • Applicable to different types fibers (SM/MM/DS/NZDS)
  • Ruggedized body, waterproof, anti-dust, anti-shock
  • Easy to maintenance, easy to replace the electrodes
  • USB port for software upgrading, records exporting
  • Support 4000/100 groups fusion records/fusion images
  • Comply with CE/Rohs international standard

fiber slicer fiber slicer

Model STXH-S27-250 STXH-S27-400
Alignment method Clad to clad
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 125/250um 400um
Coating diameter 250~1000µm
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto-heating Available
Typical splice time 14 seconds
Typical heating time 24 seconds for 60mm/40mm heating tube
Fiber magnification X or Y single fiber image 125X,X and Y double image 62.5X
Viewing display Dual high sensitivity camera, 5 inch 800*480 LCD Monitor
Data storage 4000 groups data records and 100 group images
Loss evaluation Available
Tension test 1.8~2.2N
Interface GUI menu interface, easy for operation
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life >3000 times discharge (125um),>1000 times discharge (>125um)
Terminals Micro-USB 2.0 port, for software upgrading, records exporting
Operating condition Altitude:0-5000m, Humidity:0-95%, Temperature: -10℃~+50℃; Wind: max 15m/s
Dimension/Weight 155mm (L)×144mm (W)×155mm (H) /2.3kg (including battery)

Accessories

fiber slicer

2. STXH-S-12PM Polarization Maintaining Fiber Fusion Splicer

fiber slicer

Features

  • Core to core alignment, low splicing loss
  • End view and Profile observation and alignment
  • Arc automatic calibration and splicing
  • PM fiber 45 and 90 degree alignment
  • Applicable to variety fibers splicing, such as Panda, bow-tie and elliptical fiber

fiber slicer

Applicable fiber MMF(ITU-G651),SMF(ITU-G652), NZDS(ITU-G655),DS(ITU-G653),
PM fiber Panda fiber and other type PMF
Cladding diameter 80~150µm
Coating diameter 160~900µm
Typical splice loss SMF:0.02dB MMF:0.01dB NZDS,DS:0.03dB,PMF 0.05dB
Extinction ratio 32dB(PANDA)
Cleaved length 10~16mm(coating diameter<250um); 16mm(coating diameter: 250-1000um)
Alignment method Profile and End face alignment
Splicing program 40group
Heating program 20group; Automatic heating
Operation mode Manual/ Automatic
Typical splice time Unpolarized fiber: 15seconds; PM Fiber:45seconds
Typical heating time 30 seconds for 60mm and 40mm shrinkable sleeves
Fiber Identification Automatically Identify SMF,MMF,NZDS,DS,PANDA PMF
Fiber magnification 180X (X or Y view), 90X (X and Y view)
Viewing display Dual high sensitivity camera, 5 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Terminals USB 2.0 port, for software upgrading, records exporting
Operating condition 0 ~ 40℃ Not frosted
Dimension/Weight 260mm(W)×202mm(D)×170mm(H) /5.1kg

Accessories

fiber slicer

3. STXH-X-950 Ribbon Fiber Fusion Splicer

fiber slicer

FEATURES

  • Applicable to 2-12 ribbon fiber splicing
  • Accurate alignment, world standard fusion loss
  • 20s splicing time, heating 1-2/4-12 fiber ribbon 26s/40s
  • Applicable to different types fibers (SM/MM/DS/NZDS)
  • Ruggedized body, waterproof, anti-dust, anti-shock
  • Pluggable Li-battery, support separate charging
  • Easy to maintenance, easy to replace the electrodes
  • USB port for software upgrading, records exporting
  • Support 4000/100 groups fusion records/fusion images
  • Comply with CE/Rohs international standard

fiber slicer

Specifications

Alignment method Clad to clad
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Fiber cores quantity Single core,2-12 cores
Coating diameter 250~400μm
Typical splice loss SM: 0.05dB;MM: 0.02dB;DS: 0.08dB;NZDS: 0.08dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 20 seconds
Typical heating time 1-2 cores 26 seconds,4-12 cores 40 seconds
Fiber magnification 25X
Viewing display Dual high sensitivity camera, 5 inch 800*480 LCD Monitor
Data storage 4000 groups data records and 100 group images
Loss evaluation Available
Tension test 1.8~2.2N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 150 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 3000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10℃~+50℃;Wind:max 15m/s
Dimension/ Weight 155mm(L)×144mm (W)×155mm (H) /2.3kg (incuding battery)

fier slicer

4. STXH-X-900 Multi-function Fusion Splicer

fiber slicer

FEATURES

  • 6 motors accurate core to core alignment
  • Identify fiber types(SM/MM) automatically
  • 6 seconds splicing & 18 seconds heating
  • Automatic & real-time ARC calibration
  • Industrial quad-core CPU with 30% power saving
  • Real-time heating temperature monitoring
  • Anti-shock, anti vibration, dustproof & waterproof
  • Apply to 250um/0.9mm/2.0mm/3.0mm fibers

fiber slicer

Specifications

Alignment method 6 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 6 seconds
Typical heating time 18 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 5 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 300 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimension/ Weight 156mm(L)×141mm(W)×156mm (H) /2.45kg (incuding battery)

fiber slicer

5. STXH-S-16 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • 4 motors accurate core to core alignment
  • 6 seconds splicing & 18 seconds heating
  • Automatic & real-time ARC calibration
  • Industrial quad-core CPU, faster & more stable
  • Real-time heating temperature monitoring
  • Anti-shock, anti vibration, dust-proof & waterproof
  • Apply to 250um/0.9mm/2.0mm/3.0mm fibers etc.
  • Suitable for medium backbone, FTTx projects etc.

fiber slicer

Specifications

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 6 seconds
Typical heating time 18 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimension / Weight 160mm (L) x 136mm (W) x 140mm (H) / 2.20kg (including battery)

fiber slicer

6. STXH-X-97 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • Small and light, easy to carry
  • 4 motors accurate core to core alignment
  • 7 seconds splicing & 26 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV projects etc.

fiber slicer

Specfications:

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 7 seconds
Typical heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimensions / Weight 149mm (L) x 120mm(W) x 127mm(H) / 1.90kg (including battery)

fiber slicer

7. STXH-X-800 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • 4 motors accurate core to core alignment
  • 6 seconds splicing & 20 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Anti-shock, anti vibration, dust-proof & waterproof
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV, MAN projects etc.

fiber slicer

Specificaitons

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 6 seconds
Typical heating time 20 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimensions / Weight 157mm(L) x 136mm(W) x 140mm(H) / 2.10kg (including battery)

fiber slicer

8. STXH-X-600 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • Small and light, easy to carry
  • 4 motors accurate core to core alignment
  • 7 seconds splicing & 26 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV projects etc.

fiber slicer

Specifications

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 7 seconds
Typical heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 4400mAh Li-battery, 220 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimension/Weight 200mm(L) x 123mm(W) x 95mm(H) /1.60kg (including battery)

fiber slicer

9. STXH-X-700 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • 4 motors accurate core to core alignment
  • 6 seconds splicing & 20 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Anti-shock, anti vibration, dust-proof & waterproof
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV, MAN projects etc.

fiber slicer

Specificaitons

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 6 seconds
Typical heating time 20 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimension/Weight 160mm(L) x 136mm(W) x 140mm(H) / 2.10kg (including battery)

fiber slicer

10. STXH-X-500 Handheld FTTx Fusion Splicer

fiber slicerFEATURES

  • Small and light, easy to carry
  • 4 motors accurate core to core alignment
  • 7 seconds splicing & 26 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV projects etc.

fiber slicer

Specifications

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 7 seconds
Typical heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~ +50 ℃ ;Wind:max 15m/s
Dimension/Weight 149mm(L) x 120mm(W) x 127mm(H) / 1.90kg (including battery)

fiber slicer

11. STXH-A3 Handheld FTTx Fusion Splicer

fiber slicer

FEATURES

  • Small and light, easy to carry
  • 4 motors accurate core to core alignment
  • 7 seconds splicing & 26 seconds heating
  • Automatic & real-time ARC calibration
  • Heating temperature and time both adjustable
  • Automatic splicing and heating, easy to operate
  • Apply to bare fiber, pigtails, drop cable etc.
  • Suitable for FTTx, FTTH, CATV projects etc.

fiber slicer

Specifications

Alignment method 4 motors core to core alignment
Applicable fiber SM(G.652),MM(G.651),DS(G.653),NZDS(G.655)
Cladding diameter 80 -150μm
Coating diameter 160–1000μm
Cleaved length 5-16mm ( coating diameter < 250um), 16mm (coating diameter:250-1000um)
Typical splice loss SM: 0.02dB;MM: 0.01dB;DS: 0.04dB;NZDS: 0.04dB
Return loss >60dB
Splicing program 40 groups
Operation mode Manual/ Automatic
Auto- heating Available
Typical splice time 7 seconds
Typical heating time 26 seconds for 60mm and 40mm shrinkable sleeves
Fiber magnification 250X(X or Y view), 125X(X and Y view)
Viewing display Dual high sensitivity camera, 4.3 inch 800*480 LCD Monitor
Data storage 4000 groups data records
Loss evaluation Available
Tension test 1.8~2.25N
Interface GUI menu interface, easy for operation
Battery capacity 5200mAh Li-battery, 250 cycles splicing and heating
Power supply Adaptor, input: AC100-240V(50/60HZ),output: DC11-13.5V
Electrode life More than 4000 ARC discharges, easy to replace
Terminals USB 2.0 port, for software upgrading, records exporting
Operating Altitude:0-5000m,Humidity:0-95%,Temperature:-10 ℃ ~+50 ℃ ;Wind:max 15m/s
Dimension/Weight 149mm(L) x 120mm(W) x 127mm(H) /1.90kg (including battery)