Optical Measurement of Narrow Holes

By: Roei Yiftah, Moshe Danziger and Shmulik Barzilay General Measuring deep and narrow holes with an aspect ratio of 1:5 (Diameter : Height) has always been a difficult and largely an unsolved problem. This is even more problematic if not only the bot

[New Product] Lens for Ultrashort Pulsed Laser Applications

Because of the multi photon absorption caused by internal back reflections and the resulting dielectric breakdown, a ghost free design is most important for the use of ultrashort pulsed lasers.

[New Product] Spatial Light Modulators (SLM)

KEY FEATURES High speed Pure analog phase control High bit-depth controllers (high phase resolution) High power handling Synchronization / Triggering Wavelengths from 400 1650 nm, customization for MWIR or LWIR DESCRIPTION Our Liquid Crystal on

Scanning Probe Microscope for nanotechnologies

Hollow-core Crystal Fiber in Medical and Research section

Through its unique solutions for laser beam delivery and laser frequency conversion, our technology can address most of the bio-photonic applications such as cytometry, imaging, DNA sequencing or forensics.

[New Product] Non-contact 3D Measurement Equipment

This SMART sensor measures 10,000 points/sec and allows fast 2D profile measurement, analysis and feature evaluation. Built in Smart technology also provide a standalone sensor using Web based interface without the need of installing software on PC

FARO’s Director Visited Sintec Optronics

Mr. Edward, the director of FARO with Jose and Howard, visited Sintec Optronics on April 4, 2018.

Laser De-Painting

/static/upload/image/1634608944963946.jpg

Autofocus for Laser Marking, Welding, Drilling and Cutting Systems Using Non-Contact Distance Sensor

Conventional laser marking, welding, drilling and cuttingsystems often struggle with focusing the laser precisely onthe objects surface. Optimet sensors offer a unique solutionfor autofocusing laser systems. Integrating Optimets noncontactdistance mea

Sintec Optronics sucessfully participated in Laser World of Photonics Shanghai

Sintec Optronics sucessfully participated in Laser World of Photonics India from 14 to 16 Sep 2017.

Laser Clean

New Green Cleaning Technology Laser Cleaning Laser cleaning is basically blast off the contaminants or impurities on the surface of the target by applying laser pulse directly to them. The great control over power and pulse parameters offer by laser a

Ultrafast Laser 3D Manufacturing System

Our proprietary technology on advanced ultrafast lasers based 3D manufacturing (Additive Manufacturing and Subtractive Manufacturing) opens a variety of opportunities in many fast-growing industries like aerospace, defense, bio-medicals, sensors, and

Color-corrected F-theta Scan Lens for Ultra Short Pulse Lasers

Lasers with pulses shorter than 1 picosecond, the laser creates a noticeable spectral bandwidth which will degrade the spot performance via chromatic errors. For example, an 800 femtosecond Gaussian shaped pulse has a spectral width of about 2 nm and

Low GDD Mirrors and Optics for Ultrafast Pulses

Low GDD Ultrafast mirrors are designed for femtosecond applications to provide an optimized performance at certain wavelength and angle of incidence (AOI). This is achieved by careful selection of coating stacks to combine high reflectivity and low GDD value (from -10 fs2 to 10 fs2 at design bandwidth) at the same time. Such coatings are used for external beam manipulation applications where pulse

[New Product] ALIGNMENT-FREE Autocorrelator for Ultrafast Laser Measurements

Our new product-line includes a single shot autocorrelator, capable of measuring few cycle pulses with interferometric resolution, and an innovative SHG single shot FROG. Both are suitable for several wavelength ranges (from UV to mid-IR) and several

Diffractive Optical Elements (DOE) for Laser Perforation

A perforation is a small hole in a thin material or web. Laser perforation is typically used for sheet materials such as cigarette-tip paper or packaging foil for the food industry (prolongs the freshness and quality of perishable goods). Such applica

Diffractive Optical Elements (DOE) for Laser Brazing

In laser brazing applications, two metal sheets are joined by a laser melted solder wire. The join quality has been proven to improve when the metal surfaces are cleaned and pre-heated before the brazing wire is melted. Typical applications are found

Sintec wishes everyone prosperous Chinese New Years

Sintec wishes everyone a happy and prosperous Chinese New Years! In this festive season, we would like to take the opportunity to also thank all our customers for a great 2017 year and continued partnerships in the future. This year, we have introduced several new products to our catalogs. We endeavour to work with you for your laser technology needs!

Mr. Lee of International Enterprise Singapore visited Sintec

Mr. Lee Wei Hsien, Centre Director (Wuhan) of International Enterprise Singapore, visited Sintec Optronics on January 23, 2018.

[New Product] Mini Fiber Laser Machines

We have introduced a new configuration for marking machine: Mini fiber laser marker! It is like a small computer pc size and comes with the standard laser head and z-axis stage. Included inside is a standard 20W fiber laser. The marking quality is te same as our standard fiber laser marker with a simple software interface. The simple integration of the system requires no after-installation service

Sintec wishes everyone Merry Christmas and Happy New Years !!

Sintec wishes everyone a Merry Christmas and Happy New Years! In this festive season, we would like to take the opportunity to also thank all our customers for a great 2017 year and continued partnerships in the future. This year, we have introduced

Air-cooled Laser VS Water-cooled Laser

Air-cooled laser/ laser machine: laser is cooled by the environment air (fan, fin, TEC etc.) Water-cooled laser/ laser machine: laser is cooled by chiller, two tubes connect laser and chiller (there are two types of chiller: air-cooled chiller and wat

Air-cooled Chiller VS Water-cooled Chiller

Difference: Air-cooled chiller: condenser is cooled by the environment air (fan, fin, TEC etc.) Water-cooled chiller: c ondenser is cooled by water (connected to cooling tower). Application: Air-cooled chillers: Small or medium installations. Frequent

How to Calculate Magnification of Cutting Head?

The laser cutting head magnification M can be calculated from: M = f(focal unit) / f(collimaton unit) = d(focal diameter) / d(core diameter of fiber) Focal diameter can be estimated based on above formula: d(focal diameter) = M * d(core diameter of fi