Nd:YAG Rod

Nd:YAG Rod

Keywords: Nd:YAG Rod, lasing material, Nd:YAG
Jul 05, 2020 View: 3831 Data Sheet

Capabilities: Rod size: 2 - 12mm in diameter and 1 - 180mm in length; Nd dopant concentration : 0.6% - 1.3%; Polishing; AR-coating or/and dichroic coating.

Capabilities:

  • Rod size: 2 - 12mm in diameter and 1 - 180mm in length;
  • Nd dopant concentration : 0.6% - 1.3%;
  • Polishing;
  • AR-coating or/and dichroic coating;

Nd:YAG Crystal

During the last decade, Nd:YVO4 has been developed as a promising substitutes for Nd:YAG in diode-pumped lasers due to its high absorption and emission cross-sections. However, the applications of Nd:YVO4 are limited due to its poor physical-mechanical properties and growth difficulty etc. Now, we have developed the high-doped Nd:YAG (SUPER-Nd:YAG) recently. It shows high absorption cross-section and have many advantages over Nd:YVO4:

  • Due to the cubic symmetry and high quality, Nd:YAG is easy to operate with TEMoomode
  • Nd:YAG can be Q-switched with Cr4+:YAG directly
  • Nd:YAG can produce blue laser with the frequency-doubling of 946nm
  • Nd:YAG can be operated in a very high power laser up to kW level

The high neodymium-ion doped YAG has been grown by the novel technique-Temperature Gradient Technique (TGT). The Nd concentration can be doped up to 3%. As large asf100x80mm bulk crystals with excellent optical homogeneity, less scattering particles, low dislocation density have been obtained.

Basic Properties:

Chemical Formula Y3Al5O12
Crystal structure Cubic
Lattice constant 12.01Angstrom
Melting point 1970°C
Density 4.5g/cm3
Reflective Index 1.82
Thermal Expansion Coefficient 7.8x10-6/K
Thermal Conductivity (W/m/K) 14W/m/K, 20° C 10.5W/m/K, 100° C
Mohs hardness 8.5
Stimulated Emission Cross Section 2.8x10-19cm-2
Relaxation Time of Terminal Lasing Level 30 ns
Radiative Lifetime 550ms
Spontaneous Fluorescence 230ms
Linewidth 0.6 nm
Loss Coefficient 0.003 cm-1@ 1064nm

Laser Properties:

·SUPER-Nd:YAG shows high absorption coefficients at pumping wavelengths. Therefore, a crystal short-in length (e.g.1mm) is preferred and compact microchip lasers can be constructed by using SUPER-Nd:YAG.

  • Due to the broader and smoothly-varied bandwidth of absorption, it allows of less stringent requirements of temperature control.
  • Almost same output have been achieved both in a (111)-cut 1mm long Nd:YAG and an a-cut 1mm long YVO4 microchip lasers with a very short (9mm) laser cavity.

Spectra Properties with Concentration:

Nd:Dopant 2.5% 2% 1.5% 1.3% 1.1% 1%
Fluorescence lifetime 160ms 180ms 200ms 210ms 220ms 240ms
Absorption coefficient 7.55cm-1 6.57 cm-1 5.36 cm-1 4.66 cm-1 3.88 cm-1 3.55 cm-1
Optical Quality/Grades/Nd Level
Rod Size Standard Grade Premium Grade Standard [Nd]: 1.1 Atom% Low [Nd]: 0.8 Atom%
L D Extinct. Ratio Wave Error Extinct. Ratio Wave Error Tolerance of [Nd] Over Rod Length Tolerance of [Nd] Over Rod Length
mm mm (dB) (waves) (dB) (waves) Average [Nd] delta [Nd] Average [Nd] delta [Nd]
50 3 >25 <0.19 >30 <0.13 ±.08 0.06 ±.07 0.05
50 4 <0.21 <0.15
50 5 <0.24 <0.16
100 4 >22 <0.28 >27 <0.18 ±.08 0.13 ±.06 0.09
100 5 <0.32 <0.21
100 6 <0.36 <0.23
100 6.35 <0.37 <0.24
150 6.35 >20 <0.48 >25 <0.30 ±.05 0.18 ±.04 0.13
150 8 <0.58 <0.35
150 9.52 <0.67 <0.40
200 8 >19 <0.71 >24 <0.42 ±.02 0.23 ±.02 0.17
200 9.53 <0.82 <0.49
200 10 <0.86 <0.51

Coatings

Type Reflectivity Damage Threshold Damage Threshold
(%R per Surface) (<20nS Pulse, GW/cm^2) (CW, kW/cm^2)
AR @1064nm <0.15 >1.4 >25
HR @1064nm >99.9 >1.0 >25

Typical Dimensions:

  • Diameter3, length 50mm
  • Diameter 3, length 63mm
  • Diameter 3, length 110mm
  • Diameter 4, length 50mm
  • Diameter 4, length 80mm
  • Diameter 4, length 110mm
  • Diameter 4, length 120mm
  • Diameter 4, length 130mm
  • Diameter 4, length 140mm
  • Diameter 5, length 110mm
  • Diameter 5, length 115mm
  • Diameter 5, length 130mm
  • Diameter 6, length 110mm
  • Diameter 6, length 120mm
  • Diameter 6, length 130mm
  • Diameter 6, length 150mm
  • Diameter 6, length 165mm
  • Diameter 7, length 120mm
  • Diameter 7, length 165mm
  • Diameter 8, length 120mm
  • Diameter8, length 150mm
  • Diameter 10, length 150mm

Besides the above dimensions, we also have other dimensions or custom-make according to your specific requirement.

  • Submit Inquiry
  • Send us a message

    CLOSE